SPD Flashing Guide-Using Official Flash Tool Step by Step

In This particular Post, We Will Talk About How You can Flash SPD CPU (Spreadtrum) Devices. SPD flashing guide, how to use spd flash tool, Things you need to know before flashing the SPD devices.

Now Let’s Start…

SPD CPU Mostly Used in low Budget Segment Mobiles Phones, Tablets, Also Keypad phones,

Example:- Mostly used in Chinese Phones, Micromax, Lava, Intex, Lyf, Etc.

IF You want to Confirm that Your Phone has SPD CPU,

Then simply Google it.

with Your Phone Brand Name & Model name written in the last CPU type & Chipset,

SPD Flashing Guide:

Requirements For SPD CPU Flashing?

SPD Flash tool — (Upgrade Download) Download The Latest version From ➡ HERE (spdflashtool.com)

SPD USB Driver — (If Already Driver is Installed In Your PC Then Skip)

Flash file — (Firmware, Stock Rom) It’s Always Recommended to Download Same version Or Latest version Flash File

The phone should have at least 30-50 percent of battery to perform the Flashing Process.

SPD Flash tool

SPD upgrade tool Help You to flash The Stock Firmware (.pac or .p5c based) on Your SPD (Spreadtrum) Chipset-powered smartphones and tablets. ( Free Tool)

Where to download Flash Files For SPD Devices?

There Are Many Websites for Flash File Download.

Simply Google it. Your phone model with Brand name and Add Flash File in the last.
You will get Many results, Simply Download From there.

How to Flash SPD CPU Devices?

Make Sure You Download the Above Requirements & Extract.

Now You have to open Flash Tool, (You will get the Flash tool in Flash file Folder Also)

Go to Tool Folder Click On UpgradeDownload.exe Run As Administrator.
IF Ask permission Click Yes.

1– Load packet button

♦ Here You have to select the PAC file From the Flash File Folder.

2-Start Downloading Button

♦ After the Load file, here you have to Simply Click On the Start Downloading button.

Now you have to connect the phone Via USB Data Cable in Download Mode.

For SPD Devices You can try These Combination Buttons First Remove Battery For 3,4 seconds And insert the battery again.

1 – Press & Hold Volume UP key + Connect USB Cable

2 – Press & Hold Volume UP key + Volume DOWN Key (Connect USB cable)

3 – Press & Hold Volume DOWN Key (Connect USB cable)

Some phones Need a Boot Key to enter into Download mode You can Simply Search On Google According to Your Model.

After Connect the Phone You can see in The Device manager Highlighted in Ports Section SPRD U2S Diag,

Note:– Don’t touch the Phone while Flashing.

The flashing process may take Some time,

After Flashing Complete the phone Will be Reboot Automatically It will take some time to boot.

Now it’s Done You Are Successfully Flash SPD Phone.

What to do If Your phone Is In Dead Condition, Or If You get any error?

In This Condition, First You have to try the Above method.

IF You get Any errors then You can try the Below Solutions.

Try To flash In another flash tool version,

Or You Can Try On ➡ SPD Research Tool
Or SPD ➡ Factory Tool

Try to change flash file,

Try To Check Mobile Battery, Charge or not

IF You have Infinity CM2 Dongle Then Try in Cm2

OR Try In the Miracle, (we will see Dongles Information in the upcoming post)

IF Your issue does not solve After trying the Above Solutions, Then search Solution On YouTube And Google, According to your phone model.

IF Your Phone is Still In Dead Condition, Then maybe there is a Hardware issue or an EMMC issue.

I Hope You Understand All the Above Things About the SPD flashing guide.

Feel free to write in the comment section below. If You Have Any Query Regarding This Topic,

For Next Post Follow ➡ Samsung Mobile Flashing Guide

Sharing Options